Loxeal 58-11 High Pressure Thread Sealant 100ml
The Loxeal 58-11 High Pressure Thread Sealant 100ml is an anaerobic adhesive that is ideal for the sealing of threaded metal to metal joints. This Loxeal thead sealant seals against gas, water, LPG, hydrocarbons, oils and other chemicals.
Loxeal 58-11 replaces PTFE tape and yarn and provides instant sealing against moderate pressure. It seals against gas, LPG, water, hydrocarbons, oils and other chemicals. The thixotropic property helps to stop migration of sealant from thread before, or during curing. Loxeal 58-11 threadsealing adhesive is shock and vibrations resistant, with its' sealing properties unaffected over the temperature range from -55°C to +150°C.
Also available in 50ml and 250ml tubes.
Form is not active or not available.
- High viscosity – once oxygen is expelled from sealant it will activate and start to cure
- Drip proof
- Sealing unaffected by shock/vibration within temperature range: -50°C to +150°C
- Rapid cure time - functional in less than 3 hrs
- Safe for use with potable water and AGA approved
- Not suitable for use on plastics
- Non-Toxic
- Made in Italy
| SKU | 7170583 |
|---|---|
| Weight | 10.0000 |
| Application | Kitchen, Laundry, Bathroom |
| For use with | LPG (Propane), NG, Water |
| Barcode | N/A |
| Pack Quantity | 10 |
| Retail Packaging | Yes |
| Pressure Rating (kPa) | AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa |
| Working Temp. Range (°C) | -50°C to +150°C |
| No. of Tubes x Size (ml) | 10 x 100ml |
| Composition | Anaerobic Methacrylate |
| Colour | Yellow |
| Viscosity (25°C - mPa.5) | 24,000-70,000 (high thixotropy) |
| Max. Diameter of thread/gap filling | M 80 / 3° / 0.50mm |
| Flash Point (°C) | >100 |
| Solvent Content | None |
| Shelf Life in Years (when stored at 23°C) | 2 |
| Handling Cure Time | 15-30 minutes |
| Functional Cure Time | 1-3 hours |
| Full Cure Time | 3-6 hours |
| Shear Strength | 6-12 N/mm² |
| Locking Torque (breakaway & prevailing) | 6-10 N/mm² & 2-4 N/mm² |
| Elongation at Break | More than 100% |
| AGA Approval No. | 5048 |
| Sealant/Lubricant Type | Sealants |
| Brand | Loxeal |
AUSTRALIA WIDE
Australia wide dealer network.
QUALITY PRODUCTS
Bromic Products are designed to last.
BROMIC SUPPORT
Experienced customer service team.
