Loxeal 18-10 Medium Pressure Thread Sealant 250ml
The Loxeal 18-10 Medium Pressure Thread Sealant 250ml is an anaerobic P.T.F.E. modified adhesive that is ideal for the sealing of pipe fittings and coarse thread joints. Suitable for gas, LP gas, compressed air, gasoline and oil, industrial fluids, CFC, water and several chemicals.
Low friction coefficient will assure easy assembly. Thixotropic property prevents migration from thread of the sealant before or during curing. It replaces P.T.F.E. tape and yarn. Cured product provides elastic film. Shock and vibration resistant; with sealing properties unaffected in the temperature range from -55 to +150°C.
Also available in 100ml tubes.
Form is not active or not available.
Ideal for sealing threaded joints against gas
- Rapid cure time and easy application
- High viscosity – once oxygen is expelled from sealant it will activate and start to cure
- Sealing unaffected by shock/vibration within temperature range: +10°C to + 150°C
- Not suitable for use on plastics
- Made in Italy
|Application||Kitchen, Laundry, Bathroom|
|For use with||LPG (Propane), NG|
|Pressure Rating (kPa)||AGA approved to AS 4623:2008 - Class II (500kPa), Approved by Loxeal s.r.l to 1,050 kPa|
|Working Temp. Range (°C)||+10 to +150|
|No. of Tubes x Size (ml)||10 x 250ml|
|Composition||Anaerobic Methacrylate & P.T.F.E.|
|Viscosity (25°C - mPa.5)||≈45000 mPa s @ 25°C Thixotropic|
|Density (25°C - gr/ml)||1.0|
|Max. Diameter of thread/gap filling||M 80 / 0.30mm|
|Flash Point (°C)||Approx 100|
|Shelf Life in Years (when stored at 23°C)||2|
|Handling Cure Time||20 - 40 minutes|
|Functional Cure Time||1-3 hours|
|Full Cure Time||5-10 hours|
|Shear Strength||4-6 N/mm²|
|Locking Torque (breakaway & prevailing)||1.5 - 2.5 N/mm² & 1.0 - 1.5 N/mm²|
|Elongation at Break||More than 100%|
|AGA Approval No.||5047|