7m Gas Heater Flue Kit for Stratos Brahma 3.0 & 5.0
Flue extension kits are a convenient way to enable you to install a Stratos Brahma series gas heater in a space where there is no outward facing wall available. The flue kit allows gasses to travel outside of your home, through the roof.
The Stratos Brahma heater comes standard with 500mm straight flue, allowing it to be run through to the outside when the heater is mounted on an outside facing wall. The Flue Kits include everything you need to extend the flue to the roof.
- 32mm diamater bend 90° aluminium, to link pipes together
- 32mm diamater pipe aluminium, 1000mm length
- 32mm diamater flue cowl outlet for air intake and exhaust
- Armaflex® rated to temperatures above 200°C (fitted to exhaust flue)
Form is not active or not available.
Features & Benefits:
Extends Stratos Brahma 3.0 or 5.0 flue to the roof
Allows gasses to travel outside of the home, via the roof
7m length Flue Kit
Includes: 90° bend, pipe aluminium, flue cowl & Armaflex®
Also available in 6m, 5m & 4m kits
Flued Heaters Installation Guidelines
All Bromic room sealed heaters must be installed by a licensed plumber/gas fitter
Please ensure that Bromic fluing is used on each installation. If not, warranty will be void and performance compromised
Room sizing is only dependant on the heat load required
Requirements in some States require that a certificate of compliance is given to the consumer new and/or replacement installations
Australian Standard AS5601 are to be complied with all installations of Flued gas heaters
|For use with||LPG (Propane), NG|