5m Gas Heater Flue Kit for Stratos Brahma 7.0 & 9.0
This 5m Flue extension kit allows the installation of a Stratos Brahma 7.0 or 9.0 gas heater in a space where there is no outward facing wall. The 5m flue extension allows gasses to travel outside of the home, through the roof.
The Stratos Brahma heater comes standard with a 500mm straight flue, allowing it to be run through to the outside when mounted on an outside facing wall. This 5m Flue Kit includes everything you will need to extend the flue of the 7.0 and 9.0 heater model to the roof.
KIT INCLUDES:
-
54mm diamater elbow 90° diecast aluminium, to link pipes together
-
54mm diamater bend 90° aluminium, to link pipes together
-
54mm diamater pipe aluminium 1000mm length
-
54mm diamater flue cowl outlet for air intake and exhaust
-
Armaflex® rated to temperatures above 200°C (fitted to exhaust flue)
Form is not active or not available.
Features & Benefits:
-
Extends Stratos Brahma 7.0 or 9.0 flue to the roof
-
Allows gasses to travel outside of the home, via the roof
-
5m length Flue Kit
-
Includes: 90° elbow, 90° bend, pipe aluminium, flue cowl & Armaflex®
-
Also available in 6m & 4m kits
Flued Heaters Installation Guidelines
-
All Bromic room sealed heaters must be installed by a licensed plumber/gas fitter
-
Please ensure that Bromic fluing is used on each installation. If not, warranty will be void and performance compromised
-
Room sizing is only dependant on the heat load required
-
Requirements in some States require that a certificate of compliance is given to the consumer new and/or replacement installations
-
Australian Standard AS5601 are to be complied with all installations of Flued gas heaters
| SKU | 2620959 |
|---|---|
| Application | Heating |
| For use with | LPG (Propane), NG |
AUSTRALIA WIDE
Australia wide dealer network.
QUALITY PRODUCTS
Bromic Products are designed to last.
BROMIC SUPPORT
Experienced customer service team.
